Jump to content

위키데이터 쿼리 서비스/사용자 매뉴얼

From mediawiki.org
This page is a translated version of the page Wikidata Query Service/User Manual and the translation is 15% complete.
Outdated translations are marked like this.
5분 위키데이터 쿼리 서비스 강좌

위키데이터 쿼리 서비스 (WDQS)는 하나의 소프트웨어 패키지로서 위키데이터 데이터 세트를 대상으로 여러분이 원하는 답을 검색할 수 있도록 해주는 공개 서비스인 SPARQL이라는 끝점을 제공하도록 만들어졌습니다.

이 문서과 다른 관련 문서들은 필요에 따라 변경될 예정이므로 계속 주시해서 보기를 권고합니다.

SPARQL 쿼리의 예는 SPARQL 예제 문서에서 찾아 볼 수 있습니다.

데이터셋

위키데이터 쿼리 서비스는 RDF 덤프 형식 문서에 기술된 RDF형식으로 표현이 되어 있는 Wikidata.org의 데이터 세트를 대상으로 동작을 합니다.

이 서비스의 데이터 세트는 RDF 덤프로 만들어진 데이터 세트와 정확하게 매치되지는 않는데, 그 이유는 주로 성능 때문입니다. 여기에 이 작은 다른 점들을 기술하고 있습니다.

다음에서 일주일 주기로 만들어지는 똑같은 데이터의 덤프를 다운로드 할 수 있습니다:

https://dumps.wikimedia.org/wikidatawiki/entities/

기초 - 의미 트리플이라고도 알려진 SPO(주어, 술어, 목적어) 이해하기

spo or "subject, predicate, object" is known as a triple, or commonly referred to in Wikidata as a statement about data.

The statement "The United States capital is Washington DC" consists of the subject "United States" (Q30), the predicate "capital is" (P36), and an object "Washington DC" (Q61). This statement can be represented as three URIs:

<http://www.wikidata.org/entity/Q30>  <http://www.wikidata.org/prop/direct/P36>  <http://www.wikidata.org/entity/Q61> .

Thanks to the prefixes (see below), the same statement can be written in a more concise form. Note the dot at the end to represent the end of the statement.

wd:Q30  wdt:P36  wd:Q61 .

The /entity/ (wd:) represents Wikidata entity (Q-number values). The /prop/direct/ (wdt:) is a "truthy" property — a value we would expect most often when looking at the statement. The truthy properties are needed because some statements could be "truer" than others. For example, the statement "The capital of U.S. is New York City" is true — but only in the historical context of the year 1790. WDQS uses rank to determine which statements should be used as "truthy".

In addition to the truthy statements, WDQS stores all statements (both truthy and not), but they don't use the same wdt: prefix. U.S. capital has three values: DC, Philadelphia, and New York. And each of these values have "qualifiers" - additional information, such as start and end dates, that narrows down the scope of each statement. To store this information in the triplestore, WDQS introduces an automatic "statement" subject, which is essentially a random number:

wd:Q30  p:P36  <random_URI_1> .         # US "indirect capital" is <X>
<random_URI_1>  ps:P36  wd:Q61 .        # The X's "real capital value" is  Washington DC
<random_URI_1>  pq:P580  "1800-11-17" . # The X's start date is 1800-11-17

See SPARQL tutorial - qualifiers for more information.

spo is also used as a form of basic syntax layout for querying RDF data structures, or any graph database or triplestore, such as the Wikidata Query Service (WDQS), which is powered by Blazegraph, a high performance graph database.

Advanced uses of a triple (spo) even including using triples as objects or subjects of other triples!

Basics - Understanding Prefixes

The subjects and predicates (first and second values of the triple) must always be stored as URI. For example, if the subject is Universe (Q1), it will be stored as <https://www.wikidata.org/wiki/Q1>. Prefixes allow us to write that long URI in a shorter form: wd:Q1. Unlike subjects and predicates, the object (triple's third value) can be either a URI or a literal, e.g. a number or a string.

WDQS understands many shortcut abbreviations, known as prefixes. Some are internal to Wikidata, e.g. wd, wdt, p, ps, bd, and many others are commonly used external prefixes, like rdf, skos, owl, schema.

In the following query, we are asking for items where there is a statement of "P279 = Q7725634" or in fuller terms, selecting subjects that have a predicate of "subclass of" with an object of = "literary work".

출력 변수:

PREFIX wd: <http://www.wikidata.org/entity/>
PREFIX wds: <http://www.wikidata.org/entity/statement/>
PREFIX wdv: <http://www.wikidata.org/value/>
PREFIX wdt: <http://www.wikidata.org/prop/direct/>
PREFIX wikibase: <http://wikiba.se/ontology#>
PREFIX p: <http://www.wikidata.org/prop/>
PREFIX ps: <http://www.wikidata.org/prop/statement/>
PREFIX pq: <http://www.wikidata.org/prop/qualifier/>
PREFIX rdfs: <http://www.w3.org/2000/01/rdf-schema#>
PREFIX bd: <http://www.bigdata.com/rdf#>

# The below SELECT query does the following:
# Selects all the items(?s subjects) and their labels(?label)
# that have(WHERE) the statement(?s subject) has a direct property(wdt:) = P279 <subclasses of>
# with a value of entity(wd:) = Q7725634 <Literary Work>
# and optionally return the English labels

SELECT ?s ?label WHERE {
  ?s wdt:P279 wd:Q7725634 .
  OPTIONAL {
     ?s rdfs:label ?label filter (lang(?label) = "en").
   }
 }

확장 기능

The service supports the following extensions to standard SPARQL capabilities:

레이블 서비스

You can fetch the label, alias, or description of entities you query, with language fallback, using the specialized service with the URI <http://wikiba.se/ontology#label>. The service is very helpful when you want to retrieve labels, as it reduces the complexity of SPARQL queries that you would otherwise need to achieve the same effect.

The service can be used in one of the two modes: manual and automatic.

In automatic mode, you only need to specify the service template, e.g.:

PREFIX wikibase: <http://wikiba.se/ontology#>
SERVICE wikibase:label {
    bd:serviceParam wikibase:language "en" .
}

and WDQS will automatically generate labels as follows:

  • If an unbound variable in SELECT is named ?NAMELabel, then WDQS produces the label (rdfs:label) for the entity in variable ?NAME.
  • If an unbound variable in SELECT is named ?NAMEAltLabel, then WDQS produces the alias (skos:altLabel) for the entity in variable ?NAME.
  • If an unbound variable in SELECT is named ?NAMEDescription, then WDQS produces the description (schema:description) for the entity in variable ?NAME.

In each case, the variable in ?NAME should be bound, otherwise the service fails.

Automatic mode only inspects the projection of the query – for instance, in SELECT ?aLabel (GROUP_CONCAT(?bLabel) AS ?bLabels), only the first label is recognized, and SELECT * is not supported by automatic mode at all. In such cases, you will need to use manual mode (see below).

You specify your preferred language(s) for the label with one or more of bd:serviceParam wikibase:language "language-code" triples. Each string can contain one or more language codes, separated by commas. WDQS considers languages in the order in which you specify them. If no label is available in any of the specified languages, the Q-id of the entity (without any prefix) is its label.

The Wikidata Query Service website automatically replaces [AUTO_LANGUAGE] with the language code of current user's interface. For example, if the user's UI is in French, the SPARQL's code bd:serviceParam wikibase:language "[AUTO_LANGUAGE],en" will be converted to bd:serviceParam wikibase:language "fr,en" before being sent to the query service.

Example, showing the list of US presidents and their spouses:

SELECT ?p ?pLabel ?w ?wLabel WHERE {
   wd:Q30 p:P6/ps:P6 ?p .
   ?p wdt:P26 ?w .
   SERVICE wikibase:label {
    bd:serviceParam wikibase:language "en" .
   }
 }

Try it!

In this example WDQS automatically creates the labels ?pLabel and ?wLabel for properties.

In the manual mode, you explicitly bind the label variables within the service call, but WDQS will still provide language resolution and fallback. Example:

  SELECT *
   WHERE {
     SERVICE wikibase:label {
       bd:serviceParam wikibase:language "fr,de,en" .
       wd:Q123 rdfs:label ?q123Label .
       wd:Q123 skos:altLabel ?q123Alt .
       wd:Q123 schema:description ?q123Desc .
       wd:Q321 rdf:label ?q321Label .
    }
  }

This will consider labels and descriptions in French, German and English, and if none are available, will use the Q-id as the label.

The service allows to search for items with coordinates located within a certain radius of a central point or within a certain bounding box.

Search around point

예시:

# Airports within 100km from Berlin
#defaultView:Map
SELECT ?place ?placeLabel ?location ?dist WHERE {
  # Berlin coordinates
  wd:Q64 wdt:P625 ?berlinLoc . 
  SERVICE wikibase:around { 
      ?place wdt:P625 ?location . 
      bd:serviceParam wikibase:center ?berlinLoc . 
      bd:serviceParam wikibase:radius "100" . 
      bd:serviceParam wikibase:distance ?dist.
  } 
  # Is an airport
  FILTER EXISTS { ?place wdt:P31/wdt:P279* wd:Q1248784 }
  SERVICE wikibase:label {
    bd:serviceParam wikibase:language "en" . 
  }
} ORDER BY ASC(?dist)

Try it!

The first line of the around service call must have format ?item predicate ?location, where the result of the search will bind ?item to items within the specified location and ?location to their coordinates. The parameters supported are:

Predicate 의미
wikibase:center The point around which search is performed. Must be bound for search to work.
wikibase:radius Distance from the center. Currently the distance is always in kilometers, other units are not supported yet.
wikibase:globe The globe which is being searched. Optional, default is Earth (wd:Q2).
wikibase:distance The variable receiving distance information

Search within box

Example of box search:

# Schools between San Jose, CA and Sacramento, CA
#defaultView:Map
SELECT * WHERE {
  wd:Q16553 wdt:P625 ?SJloc .
  wd:Q18013 wdt:P625 ?SCloc .
  SERVICE wikibase:box {
      ?place wdt:P625 ?location .
      bd:serviceParam wikibase:cornerSouthWest ?SJloc .
      bd:serviceParam wikibase:cornerNorthEast ?SCloc .
  }
  FILTER EXISTS { ?place wdt:P31/wdt:P279* wd:Q3914 }
}

Try it!

또는:

#Schools between San Jose, CA and San Francisco, CA
#defaultView:Map
SELECT ?place ?location WHERE {
  wd:Q62 wdt:P625 ?SFloc .
  wd:Q16553 wdt:P625 ?SJloc .
  SERVICE wikibase:box {
    ?place wdt:P625 ?location .
    bd:serviceParam wikibase:cornerWest ?SFloc .
    bd:serviceParam wikibase:cornerEast ?SJloc .
  }
  FILTER EXISTS { ?place wdt:P31/wdt:P279* wd:Q3914 }
}

Try it!

Coordinates may be specified directly:

# Schools between San Jose, CA and Sacramento, CA
#same as previous
#defaultView:Map
SELECT * WHERE {
SERVICE wikibase:box {
    ?place wdt:P625 ?location .
    bd:serviceParam wikibase:cornerWest "Point(-121.872777777 37.304166666)"^^geo:wktLiteral .
    bd:serviceParam wikibase:cornerEast "Point(-121.486111111 38.575277777)"^^geo:wktLiteral .
  }
  FILTER EXISTS { ?place wdt:P31/wdt:P279* wd:Q3914 }
}

Try it!

The first line of the box service call must have format ?item predicate ?location, where and the result of the search will bind ?item to items within the specified location and ?location to their coordinates. The parameters supported are:

Predicate 의미
wikibase:cornerSouthWest The south-west corner of the box.
wikibase:cornerNorthEast The north-east corner of the box.
wikibase:cornerWest The western corner of the box.
wikibase:cornerEast The eastern corner of the box.
wikibase:globe The globe which is being searched. Optional, default is Earth (wd:Q2).

wikibase:cornerSouthWest and wikibase:cornerNorthEast should be used together, as well as wikibase:cornerWest and wikibase:cornerEast, and cannot be mixed. If wikibase:cornerWest and wikibase:cornerEast predicates are used, then the points are assumed to be the coordinates of the diagonal of the box, and the corners are derived accordingly.

Extended functions

Distance function

The function geof:distance returns distance between two points on Earth, in kilometers. Example usage:

# Airports within 100km from Berlin
SELECT ?place ?placeLabel ?location ?dist WHERE {

  # Berlin coordinates
  wd:Q64 wdt:P625 ?berlinLoc . 
  SERVICE wikibase:around { 
      ?place wdt:P625 ?location . 
      bd:serviceParam wikibase:center ?berlinLoc . 
      bd:serviceParam wikibase:radius "100" . 
  } 
  # Is an airport
  ?place wdt:P31/wdt:P279* wd:Q1248784 .
  SERVICE wikibase:label {
    bd:serviceParam wikibase:language "en" . 
  }
  BIND(geof:distance(?berlinLoc, ?location) as ?dist) 
} ORDER BY ?dist

Try it!

# Places around 0°,0° 
SELECT *
{
  SERVICE wikibase:around { 
      ?place wdt:P625 ?location . 
      bd:serviceParam wikibase:center "Point(0 0)"^^geo:wktLiteral .
      bd:serviceParam wikibase:radius "250" . 
  } 
  SERVICE wikibase:label { bd:serviceParam wikibase:language "en" . ?place rdfs:label ?placeLabel }
  BIND(geof:distance("Point(0 0)"^^geo:wktLiteral, ?location) as ?dist) 
} 
ORDER BY ?dist

Try it!

Coordinate parts functions

Functions geof:globe, geof:latitude & geof:longitude return parts of a coordinate - globe URI, latitude and longitude accordingly.

Decode URL functions

Function wikibase:decodeUri decodes (i.e. reverses percent-encoding) given URI string. This may be necessary when converting Wikipedia titles (which are encoded) into actual strings. This function is an opposite of SPARQL encode_for_uri function.

# Example usage of wikibase:decodeUri function
SELECT DISTINCT * WHERE {
  ?el wdt:P31 wd:Q5.
  ?webRaw schema:about ?el;
    schema:inLanguage "ru";
    schema:isPartOf <https://ru.wikipedia.org/>.
  BIND(URI(wikibase:decodeUri(STR(?webRaw))) AS ?webHyperlink) .
  BIND(wikibase:decodeUri(STR(?webRaw)) AS ?webString) .
}
LIMIT 20

Automatic prefixes

Most prefixes that are used in common queries are supported by the engine without the need to explicitly specify them.

Extended dates

The service supports date values of type xsd:dateTime in the range of about 290B years in the past and in the future, with one-second resolution. WDQS stores dates as the 64-bit number of seconds since the Unix epoch.

Blazegraph extensions

경고 경고: As Blazegraph is not actively developed, it is planned to migrate Wikidata Query Service to another triplestore. The following may be discontinued at some point.

Blazegraph platform on top of which WDQS is implemented has its own set of SPARQL extension. Among them several graph traversal algorithms which are documented on Blazegraph Wiki, including BFS, shortest path, CC and PageRank implementations.

Please also refer to the Blazegraph documentation on query hints for information about how to control query execution and various aspects of the engine.

There is no documentation in the BlazeGraph wiki about the bd:sample extension. It's documented only in a comment in the code.

Federation

We allow SPARQL Federated Queries to call out to a selected number of external databases. Please see the full list of federated endpoints on the dedicated page.

Example federated query:


SELECT ?workLabel WHERE {
  wd:Q165257 wdt:P2799 ?id 
  BIND(uri(concat("https://data.cervantesvirtual.com/person/", ?id)) as ?bvmcID) 
  SERVICE <http://data.cervantesvirtual.com/openrdf-sesame/repositories/data> {
    ?bvmcID <http://rdaregistry.info/Elements/a/otherPFCManifestationOf> ?work .
    ?work rdfs:label ?workLabel        
  }
}

Try it!

Please note that the databases that the federated endpoints serve use ontologies that may be very different from the Wikidata one. Please refer to the owner documentation links to learn about the ontologies and data access to these databases.

미디어위키 API

Please see full description on MediaWiki API Service documentation page.

MediaWiki API Service allows to call out to MediaWiki API from SPARQL, and receive the results from inside the SPARQL query. Example (finding category members):


SELECT * WHERE {
  wd:Q6501349 wdt:P910 ?category .
  ?link schema:about ?category; schema:isPartOf <https://en.wikipedia.org/>; schema:name ?title .
  SERVICE wikibase:mwapi {
	 bd:serviceParam wikibase:api "Generator" .
     bd:serviceParam wikibase:endpoint "en.wikipedia.org" .
     bd:serviceParam mwapi:gcmtitle ?title .
     bd:serviceParam mwapi:generator "categorymembers" .
     bd:serviceParam mwapi:gcmprop "ids|title|type" .
     bd:serviceParam mwapi:gcmlimit "max" .
    # out
    ?subcat wikibase:apiOutput mwapi:title  .
    ?ns wikibase:apiOutput "@ns" .
    ?item wikibase:apiOutputItem mwapi:item .
  }
}

Try it!

위키미디어 서비스

Wikimedia runs the public service instance of WDQS, which is available for use at http://query.wikidata.org/.

The runtime of the query on the public endpoint is limited to 60 seconds. That is true both for the GUI and the public SPARQL endpoint.

GUI

The GUI at the home page of http://query.wikidata.org/ allows you to edit and submit SPARQL queries to the query engine. The results are displayed as an HTML table. Note that every query has a unique URL which can be bookmarked for later use. Going to this URL will put the query in the edit window, but will not run it - you still have to click "Execute" for that.

One can also generate a short URL for the query via a URL shortening service by clicking the "Generate short URL" link on the right - this will produce the shortened URL for the current query.

The "Add prefixes" button generates the header containing standard prefixes for SPARQL queries. The full list of prefixes that can be useful is listed in the RDF format documentation. Note that most common prefixes work automatically, since WDQS supports them out of the box.

The GUI also features a simple entity explorer which can be activated by clicking on the "🔍" symbol next to the entity result. Clicking on the entity Q-id itself will take you to the entity page on wikidata.org.

Default views

Main article: Wikidata:SPARQL query service/Wikidata Query Help/Result Views

If you run the query in the WDQS GUI, you can choose which view to present by specifying the tag: #defaultView:viewName at the beginning of the query.

Display a title

If you run the query in the WDQS GUI, you can display a title on top of the results by specifying the tag: #title: String you want to display at the beginning of the query.

SPARQRL 엔드포인트

SPARQL queries can be submitted directly to the SPARQL endpoint with a GET or POST request to https://query.wikidata.org/sparql.

POST requests can alternatively accept the query in the body of the request, instead of the URL, which allows running larger queries without hitting URL length limits. (Note that the POST body must still include the query= prefix (that is, it should be query=(SPARQL_query) rather than just (SPARQL query)), and the SPARQL query must still be URL-escaped.)

The result is returned as XML by default, or as JSON if either the query parameter format=json is included in the URL, or the header Accept: application/sparql-results+json is provided with the request.

The JSON format is standard SPARQL 1.1 Query Results JSON Format.

It is recommended to use GET for smaller queries and POST for larger queries, as POST queries are not cached.

지원 포맷

다음의 출력 포맷이 현재 SPARQL 엔드포인트에 의해 지원됩니다:

포맷 HTTP 헤더 쿼리 변수 설명
XML Accept: application/sparql-results+xml format=xml XML result format, is returned by default. As specified in https://www.w3.org/TR/rdf-sparql-XMLres/
JSON Accept: application/sparql-results+json format=json JSON result format, as in: https://www.w3.org/TR/sparql11-results-json/
TSV Accept: text/tab-separated-values As specified in https://www.w3.org/TR/sparql11-results-csv-tsv/
CSV Accept: text/csv As specified in https://www.w3.org/TR/sparql11-results-csv-tsv/
바이너리 RDF Accept: application/x-binary-rdf-results-table

쿼리 타임아웃

There is a hard query deadline configured which is set to 60 seconds. There are also following limits:

  • One client (user agent + IP) is allowed 60 seconds of processing time each 60 seconds
  • One client is allowed 30 error queries per minute

Clients exceeding the limits above are throttled with HTTP code 429. Use Retry-After header to see when the request can be repeated. If the client ignores 429 responses and continues to produce requests over the limits, it can be temporarily banned from the service. Clients who don’t comply with the User-Agent policy may be blocked completely – make sure to send a good User-Agent header.

Every query will timeout when it takes more time to execute than this configured deadline. You may want to optimize the query or report a problematic query here.

Also note that currently access to the service is limited to 5 parallel queries per IP. The above limits are subject to change depending on resources and usage patterns.

Explain Query

Blazegraph allows to show query analysis that explains how the query has been parsed and which optimizations were applied. To see this information, add explain=details parameter to the query string, for example: https://query.wikidata.org/sparql?query=SELECT%20?dob%20WHERE%20{wd:Q42%20wdt:P569%20?dob.}&explain=details.

이름공간

The data on Wikidata Query Service contains the main namespace, wdq, to which queries to the main SPARQL endpoint are directed, and other auxiliary namespaces, listed below. To query data from different namespace, use endpoint URL https://query.wikidata.org/bigdata/namespace/NAMESPACENAME/sparql.

분류

Please see full description on Categories documentation page.

Wikidata Query Service also provides access to the category graph of select wikis. The list of covered wikis can be seen here: https://noc.wikimedia.org/conf/dblists/categories-rdf.dblist

The category namespace name is categories. The SPARQL endpoint for accessing it is https://query.wikidata.org/bigdata/namespace/categories/sparql.

Please see Categories page for detailed documentation.

DCAT-AP

The DCAT-AP data for Wikidata is available as SPARQL at https://query.wikidata.org/bigdata/namespace/dcatap/sparql endpoint.

Example query to retrieve data:

PREFIX dcat: <http://www.w3.org/ns/dcat#>
PREFIX dct: <http://purl.org/dc/terms/>

SELECT ?url ?date ?size WHERE {
  <https://www.wikidata.org/about#catalog> dcat:dataset ?dump .
  ?dump dcat:distribution [
    dct:format "application/json" ;
    dcat:downloadURL ?url ;
    dct:issued ?date ;
    dcat:byteSize ?size 
  ] .
}

Linked Data Fragments endpoint

We also support querying the database using Triple Pattern Fragments interface. This allows to cheaply and efficiently browse triple data where one or two components of the triple is known and you need to retrieve all triples that match this template. See more information at the Linked Data Fragments site.

The interface can be accessed by the URL: https://query.wikidata.org/bigdata/ldf. This service is implemented on the top of Blazegraph database, so it will have the same lag as the Query Service. Example requests:

$ curl \
  --get \
  -H 'Accept: application/rdf+xml' \
  --data-urlencode 'predicate=http://www.wikidata.org/prop/direct/P212' \
  --data-urlencode 'object="978-0-262-03293-3"' \
  'https://query.wikidata.org/bigdata/ldf'

Note that only full URLs are currently supported for the subject, predicate and object parameters.

By default, HTML interface is displayed, however several data formats are available, defined by Accept HTTP header.

Available data formats
Accept 포맷
text/html Default HTML browsing interface
text/turtle Turtle format
application/ld+json JSON-LD format
application/n-triples N-Triples format
application/rdf+xml RDF/XML format

The data is returned in pages, page size being 100 triples. The pages are numbered starting from 1, and page number is defined by page parameter.

독립 서비스

As the service is open source software, it is also possible to run the service on any user's server, by using the instructions provided below.

The hardware recommendations can be found in Blazegraph documentation.

If you plan to run the service against non-Wikidata Wikibase instance, please see further instructions.

설치

In order to install the service, it is recommended that you download the full service package as a ZIP file, e.g. from Maven Central, with group ID org.wikidata.query.rdf and artifact ID service , or clone the source distribution at https://github.com/wikimedia/wikidata-query-rdf/ and build it with "mvn package". The package ZIP will be in the dist/target directory under service-VERSION-dist.zip.

The package contains the Blazegraph server as a .war application, the libraries needed to run the updater service to fetch fresh data from the wikidata site, scripts to make various tasks easier, and the GUI in the gui subdirectory. If you want to use the GUI, you will have to configure your HTTP server to serve it.

By default, only the SPARQL endpoint at http://localhost:9999/bigdata/namespace/wdq/sparql is configured, and the default Blazegraph GUI is available at http://localhost:9999/bigdata/. Note that in the default configuration, both are accessible only from localhost. You will need to provide external endpoints and an appropriate access control if you intend to access them from outside.

스냅샷 버전 사용하기

If you want to install an un-released snapshot version (usually this is necessary if released version has a bug which is fixed but new release is not available yet) and do not want to compile your own binaries, you can use either:

Needs git fat working. Check it out and do "git fat pull".

데이터 적재

경고 경고: As of 2020, in Wikimedia servers it will take about 12 days to get all data in the dump imported, and another 12 days to make the query service catching up the lag.

Further install procedure is described in detail in the Getting Started document which is part of the distribution, and involves the following steps:

  1. Download recent RDF dump from https://dumps.wikimedia.org/wikidatawiki/entities/ (the RDF one is the one ending in .ttl.gz).
  1. Pre-process data with the munge.sh script.

This creates a set of TTL files with preprocessed data, with names like wikidump-000000001.ttl.gz, etc. See options for the script below.

  1. Start Blazegraph service by running the runBlazegraph.sh script.
  1. Load the data into the service by using loadData.sh. Note that loading data is usually significantly slower than pre-processing, so you can start loading as soon as several preprocessed files are ready. Loading can be restarted from any file by using the options as described below.
  1. After all the data is loaded, start the Updater service by using runUpdate.sh.

분류 적재

If you also want to load category data, please do the following:

  1. # 이름공간 만들기. 예: categories: createNamespace.sh categories
  2. # 데이터 적재: forAllCategoryWikis.sh loadCategoryDump.sh categories

Note that these scripts only load data from Wikimedia wikis according to Wikimedia settings. If you need to work with other wiki, you may need to change some variables in the scripts.


스크립트

The following useful scripts are part of the distribution:

munge.sh

Pre-process data from RDF dump for loading.

옵션 Required? 설명
-f filename Required Filename of the RDF dump
-d directory Optional Directory where the processed files will be written, default is current directory
-l language Optional If specified, only labels for the given language will be retained. Use this option if you need only one language, as it may improve performance, reduce the database size and simplify queries.
-s Optional If specified, the data about sitelinks is excluded. Use this option if you do not need to query sitelinks, as this may improve performance and reduce the database size.
-c size Optional Use this option to override the default chunk size. Too big chunks may time out when importing.

예시:

./munge.sh -c 50000 -f data/wikidata-20150427-all-BETA.ttl.gz -d data -l en -s

Load processed data into Blazegraph. Requires curl to be installed.

옵션 Required? 설명
-n namespace Required Specifies the graph namespace into which the data is loaded, which should be wdq for WDQS data
-d directory Optional Directory where processed files are stored, by default the current directory
-h host Optional Hostname of the SPARQL endpoint, by default localhost
-c context Optional Context URL of the SPARQL endpoint, by default bigdata - usually doesn't need to be changed for WDQS
-s start Optional Number of the processed file to start with, by default 1
-e end Optional Number of the processed file to end with

예시:

./loadData.sh -n wdq -d `pwd`/data

runBlazegraph.sh

Run the Blazegraph service.

옵션 Required? 설명
-d directory Optional Home directory of the Blazegraph installation, by default the same directory where the script is
-c context Optional Context URL of the SPARQL endpoint, by default bigdata - usually doesn't need to be changed for WDQS
-p port Optional Port number of the SPARQL service, by default 9999
-o options Optional Add options to the command line

Example:

./runBlazegraph.sh

Inside the script, there are two variables that one may want to edit:

# Q-id of the default globe
DEFAULT_GLOBE=2
# Blazegraph HTTP User Agent for federation
USER_AGENT="Wikidata Query Service; https://query.wikidata.org/";

Also, the following environment variables are checked by the script (all of them are optional):

Variable Default 설명
HOST localhost Hostname for binding the Blazegraph service
PORT 9999 Port for binding the Blazegraph service
DIR directory where the script is located Directory where config files are stored
HEAP_SIZE 16g Java heap size for Blazegraph
MEMORY -Xms${HEAP_SIZE} -Xmx${HEAP_SIZE} Full Java memory settings for Blazegraph
GC_LOGS see the source GC logging settings
CONFIG_FILE RWStore.properties Blazegraph configuration file location
BLAZEGRAPH_OPTS empty Additional options, are passed as-is to the Java command line

runUpdate.sh

Run the Updater service.

Option Required? Explanation
-n namespace Optional Specifies the graph namespace into which the data is loaded, should be wdq for WDQS data. Default: wdq
-h host Optional Hostname of the SPARQL endpoint, by default localhost
-c context Optional Context URL of the SPARQL endpoint, by default bigdata - usually doesn't need to be changed for WDQS
-l language Optional If specified, only labels for given language will be retained. Use this option if you need only one language, as it may improve performance, reduce the database size and simplify queries.
-s Optional If specified, the data about sitelinks is excluded. Use this option of you do not need to query sitelinks, as this may improve performance and reduce the database size.
-t secs Optional Timeout when communicating to Blazegraph, in seconds.
-N Optional This option causes the script to ignore options that may cause problems when running second Updater while the first is already running. Use it when running secondary Updater e.g. to catch up specific item with --ids (see below).
-S Optional Log to console instead of log files. Useful when running the script from the command line for maintenance tasks.

It is recommended that the settings for the -l and -s options (or absence thereof) be the same for munge.sh and runUpdate.sh, otherwise data may not be updated properly.

Example:

./runUpdate.sh

Also, the following environment variables are checked by the script (all of them are optional):

Variable Default Explanation
UPDATER_OPTS empty Additional options, are passed as-is to the Java command line

Updater options

The following options works with Updater app.

They should be given to the runUpdate.sh script as additional options after --, e.g.: runUpdate.sh -- -v.

Options for the Updater
옵션 Long option Meaning
-v --verbose Verbose mode
-s TIMESTAMP --start TIMESTAMP Start data collection from certain timestamp, in 2015-02-11T17:11:08Z or 20150211170100 format.
--keepTypes Keep all type statements
--ids ID1,ID2,... Update certain IDs and exit
--idrange ID1-ID2 Update range of IDs and exit
-d SECONDS --pollDelay SECONDS How long to sleep when no new data is available
-t NUMBER --threadCount NUMBER How many threads to use when fetching Wikibase data
-b NUMBER --batchSize NUMBER How many changes to fetch from RecentChanges API
-V --verify Verify data after loading (SLOW! For debug use only)
-T SECONDS --tailPollerOffset SECONDS Use secondary trailing poller with given offset behind the main one
--entityNamespaces NUMBER,NUMBER,... List of Wikibase namespaces to check for changes
-W --wikibaseUrl URL URL to use when talking to Wikibase. E.g. https://www.wikidata.org. Must be set if updates do not come from Wikidata.
-U --conceptUri URL URL base of the URLs used to represent Wikibase entities in RDF. E.g. http://www.wikidata.org. Must be set if the Wikibase instance does not use Wikidata-based prefixes.
--commonsUri URL Commons URI for SDC support. Both --conceptUri and --commonsUri should be set for this to work.
--wikibaseScheme SCHEME URL scheme (http, https) to use when talking to Wikibase. (구식화됨) Use wikibaseUrl above instead.
--wikibaseHost HOSTNAME Hostname to use when talking to Wikibase. (구식화됨) Use wikibaseUrl above instead.
-I --init If specified together with start time, this time is marked in the database as most recent change time, and future requests would be using it as starting point even if no newer data has been found.
--constraints Load constraints violations for updated items via constraintsrdf API.
-K SERVERS --kafka SERVERS If specified, Updater will use Kafka as the update source and the specified servers as brokers. E.g. kafka1001.eqiad.wmnet:9092,kafka1002.eqiad.wmnet:9092,kafka1003.eqiad.wmnet:9092
-C NAME --consumer NAME Kafka consumer name. It is a good idea to set it to the host name or something based on it.
-c NAME1,NAME2 --cluster NAME1,NAME2 Kafka cluster names. If specified, the Kafka topic names will be prefixed by cluster names, so instead of topic1 there would be NAME1.topic1 and NAME2.topic2.
--resetKafka Reset Kafka offsets
--apiPath Path to the API, e.g. /w/api.php (default) or /api.php. (I78c222fe8b버전부터 도입됨)
--entityDataPath Path to the entities, e.g. /wiki/Special:EntityData/ (default) or /Special:EntityData/. (I78c222fe8b버전부터 도입됨)

구성 가능한 속성

The following properties are configurable via adding them to the script run command in the scripts above:

이름 의미 Default
wikibaseServiceWhitelist Filename of remote service whitelist. Applies to Blazegraph. whitelist.txt
org.wikidata.query.rdf.blazegraph.mwapi.MWApiServiceFactory.config Config file for MWAPI integration mwservices.json
com.bigdata.rdf.sail.sparql.PrefixDeclProcessor.additionalDeclsFile Filename that contains additional prefix definitions. The syntax is as in SPARQL query. These definitions will be loaded by Blazegraph and available for all queries.
wikibaseConceptUri URL prefix for Wikibase data, which is used in RDF representation of entities. Needs to be set if the dataset does not use Wikidata prefixes. http://www.wikidata.org
commonsConceptUri URL prefix for Structured Data on Commons support. Both wikibaseConceptUri and commonsConceptUri should be set for it to work.
wikibaseHost Hostname of the wikibase instance. Applies to both Blazegraph and Updater. (구식화됨) Use wikibaseConceptUri above. www.wikidata.org
org.wikidata.query.rdf.blazegraph.inline.literal.WKTSerializer.noGlobe Default globe value for coordinates that have no globe. "2" would mean that entity Q2 is the default globe. "0" means no default globe. Applies to Blazegraph. 0
org.wikidata.query.rdf.tool.rdf.RdfRepository.timeout Timeout when communicating with RDF repository, in seconds. Applies to Updater. -1
org.wikidata.query.rdf.tool.wikibase.WikibaseRepository.timeout Timeout when communicating with wikibase repository, in milliseconds. Applies to Updater. 5000
http.userAgent User agent that the service would use while calling other services
http.proxyHost http.proxyPort

https.proxyHost https.proxyPort

Proxy settings used while calling other services
wikibaseMaxDaysBack How many days back we can request the recent changes data from Updater. If the database is more than this number of days older, it should be reloaded from more recent dump. 30

없는 기능

현재 지원하지 않는 기능은 다음과 같습니다:

  • Redirects are only represented as owl:sameAs triple, but do not express any equivalence in the data and have no special support.

연락

If you notice anything wrong with the service, you can contact the Discovery team by email on the list discovery@lists.wikimedia.org or on the IRC channel #wikimedia-discovery.

Bugs can also be submitted to 파브리케이터 and tracked on the Discovery Phabricator board.

같이 보기