Es beginnt mit dem Einheitskreis mit Radius um und dem Einzeichnen des Durchmessers . Als Nächstes wird die dazu senkrecht stehende Mittelachse eingetragen. Es folgt jeweils ein Kreisbogen mit Radius um und ; die Schnittpunkte sind und bzw. und . Eine nicht eingezeichnete Mittelsenkrechte zwischen und halbiert den Kreisbogen in . Das Lot von auf die Strecke trifft diese im Punkt . Der Punkt ergibt sich als Schnittpunkt der nicht eingezeichneten Mittelsenkrechten zwischen und mit dem Kreis.
Weiter geht es mit dem Übertragen des Abstandes ab ; dabei erhält man als Schnittpunkt mit dem Kreis. Das Lot von auf die Strecke trifft diese im Punkt . Der Punkt ergibt sich als Schnittpunkt der nicht eingezeichneten Mittelsenkrechten zwischen und mit dem Kreis. Die abschließende Verbindungstrecke schneidet in und liefert somit die Strecke , deren Länge nahezu gleich dem Sollwert ist.
Ergebnis
In GeoGebra werden max. 15 Nachkommastellen angezeigt.
Bei einem Würfel 1 mit der Kantenlänge a1 = 1 Mrd. km (das Licht bräuchte für diese Strecke ca. 56 min.) wäre bezüglich der konstruierten Kantenlänge a2 des verdoppelten Würfels 2 kein Fehler evaluierbar.
Somit liegt die Vermutung nahe, dass der absolute Fehler < 1 mm ist.
Bei einem Würfel 1 mit der Kantenlänge a1 = 10 km wäre der Fehler des Volumens vom verdoppelten Würfel 2 vermutlich < 0,7 dm3 oder < 1 Liter.
It starts with the (Unit_circle) with radius around and drawing in the diameter . Next, the centre axis perpendicular to it is entered. This is followed by an arc of radius around and ; the intersections are and or and . An undrawn perpendular bisector between and bisects the arc in . The perpendicular from to the line segment meets it at the point . The point results from the intersection of the undrawn median perpendicular between and with the circle.
Continue by transferring the distance from ; this gives as the intersection with the circle. The perpendicular from to the line segment meets it at the point . The point results from the intersection of the not drawn median perpendicular between and with the circle. The final connecting line segment intersects in and thus yields the line segment whose length is almost equal to the nominal value .
Result
A maximum of 15 decimal places are displayed in GeoGebra.
With a cube 1 with the edge length a1 = 1 billion km (the light would need for this distance approx. 56 min.) the constructed edge length would be a2 of doubled cube 2 no error evaluable.
It is therefore reasonable to assume that the absolute error is < 1 mm.
Given a cube 1 with edge length a1 = 10 km the error of the volume of doubled cube 2 would probably be < 0,7 dm3 or < 1 liter.
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.